رم ای سی سی سرور ورک استیشن کینگ استون KingStone ECC DDR4 2133MHz 16GB PC4 KVR21R15D4/16 16GB Module CL15 1.2V Registred DIMM Row Cycke Time 47.05ns 2G x72-bit SDRAM PC4-2133 CL15 Registered w/Parity 288-Pin RAM

DESCRIPTION
Document No. VALUERAM1447-001.C00 02/24/15 Page 1
SPECIFICATIONS
*Power will vary depending on the SDRAM used.
KVR21R15D4/16
16GB 2Rx4 2G x 72-Bit PC4-2133
CL15 Registered w/Parity 288-Pin DIMM
Continued >>
kingston.com
FEATURES
ValueRAM's KVR21R15D4/16 is a 2G x 72-bit (16GB)
DDR4-2133 CL15 SDRAM (Synchronous DRAM) registered w/
parity, 2Rx4, ECC, memory module, based on thirty-six 1G x
4-bit FBGA components. The SPD is programmed to JEDEC
standard latency DDR4-2133 timing of 15-15-15 at 1.2V. Each
288-pin DIMM uses gold contact fingers. The electrical and
mechanical specifications are as follows: Power Supply: VDD=1.2V (1.14V to 1.26V)
VDDQ = 1.2V (1.14V to 1.26V)
VPP - 2.5V (2.375V to 2.75V)
VDDSPD=2.25V to 2.75V
Functionality and operations comply with the DDR4 SDRAM datasheet
16 internal banks
Bank Grouping is applied, and CAS to CAS latency (tCCD_L, tCCD_S) for
the banks in the same or different bank group accesses are available
Data transfer rates: PC4-2133, PC4-1866, PC4-1600
Bi-Directional Differential Data Strobe
8 bit pre-fetch
Burst Length (BL) switch on-the-fly BL8 or BC4(Burst Chop)
Supports ECC error correction and detection
On-Die Termination (ODT)
Temperature sensor with integrated SPD
This product is in compliance with the RoHS directive.
Per DRAM Addressability is supported
Internal Vref DQ level generation is available
Write CRC is supported at all speed grades
CA parity (Command/Address Parity) mode is supported